Collection of class notes and useful links for Architectural Education

A kind reminder for the students taking ARCH521 - Environmental Analysis & Management: Please note that our lecture on Thursday, 12th March 2020 shall start at 12:30

ARCD142 - Construction Technology I Classwork & Homework I due to Friday, 13th March 2020 Below sketch ground plans of two buildings are given. Please define their structure, design their foundations, and indicate the structural elements and materials used. Name the principal load distribution axes and give necessary dimensions. Please use sketch drawings and diagram presentations for your answers as well as verbal explanations. Please prepare a scale model of the solid structure.      SCALE: 1 / 50

I am in the process of rearranging course related information. All rules and syllabuses can (shall) be accessed from this link (under construction).  I will provide detail information later. Dersler ile ilgili tüm bilgiler (ve notlar) yeniden düzenlenmektedir. Daha önce buradan paylaştığım tüm kurallar ve ders izlencelerini (tamamlandıkça) bu bağlantıdan indirebilirsiniz. İleride daha detaylı bilgi paylaşacağım.

Tomorrow is the big day! You may find the required information to submit your final work below: First things first: Please read previous post about final submissions and make sure you did not miss anything Evaluation Critertia: Staircase: %60 (of which %10 for the ballustrade detail, %15 for each section / section-elevation, %20 for the plans) Roofing: %40 (of which %10 for the ridge OR eaves detail, %10 for each of the plan and two sections) The following checklist is provided to help you "not to miss" any major requirement: Staircase: Staircase Plans: Most Important: The staircase ballustrade securing the interior of the staircase is continous and at the top floor, it is correctly terminated. Staircase is drawn according to the applicable design principles and standards; in particular, the landing depth is not less than the step length. Important: Are all the floor plans had been drawn according to basic technical drawing rules? Structural ...

The most descriptive illustration I found is the one below: The original version of this illustration is found here The red stripes are special dampproofing materials. Because the raft foundation and shear walls are constructed one after another; the adherence in between cannot be guaranteed and a joint is formed which is called a "cold" joint (the grey line in between). Water can penetrate from this joint and to prevent that, a special insulation material that expands when met with water is applied here. This type of isolation is also necessary if for some reason we create holes on the shear wall. One other insulation required on the shear wall is applied to close holes on the wall which are leftovers of forming work. Cementitious material is applied to these holes which does not change its size (shrink) when freezes. The blue layers are the actual water isolation layers. The most common type is in the form of bituminous roll sheets as can be seen in below ph...

Lütfen çalışmamızı bu bağlantıdan yükleyiniz. Please upload your work here.