Recovery Exam for ARCD142 Building Technology - I

You will have to submit the following based on your own Architectural Design Project you are about to complete for The ARCD102 Course (or whichever studio you are in):
  1. Ground Floor Plan, Scale: 1/50
    • The plan shall be drawn with the details of the immediate environment (landscaping, patios, etc.)
    • Indicate structural axes (either it is a solid structure of frame structure)
    • Interior and Exterior dimensions are required.
    • Note all necessary elevations on the plan.
    • Indicate the placement of cross sections .
    • Please design stairs (three steps min.) at the entrance porch of your building.
    • Do not forget to indicate the projection of the eaves of the roof above and show the place of rainwater downpipes.
  2. Foundation Plan, Scale: 1/50
    • Indicate structural axes (either it is a solid structure of frame structure)
    • Interior and Exterior dimensions are required.
  3. Two sections, Scale: 1/50
    • Indicate structural axes (identify either it is a solid structure of frame structure)
    • Show roofing structure, name the roofing elements.
    • Show foundations in section (foundation depth: 120cm. from topsoil to the bottom of the foundation footing)
    • Give all necessary dimensions and note all the required elevations.
Submission deadline: June 7th Sunday 2020 Midnight, submissions after that time shall be accepted until June 8th, Monday 2020, 10:00AM with %20 penalty.

Anyone who already passed the class does not have to submit any project but, the chance is open to everyone (including students who fail the class with an "F"). Even if you passed the class, you may still submit a project to improve your knowledge.

All submissions shall be sent to kerem.ercoskun@okan.edu.tr mail address.

Good Luck!

Yorumlar

Yorum Gönder

Bu blogdaki popüler yayınlar

Neufert

Continous Exterior Water Isolation / Dampproofing at Raft Foundations (Basement Tanking)

Sayılar ve Matematik